|
I always wash any chassis I'm working on with a hose. First remove any paper and cardboard items, then I spray the chassis with a detergent. Then I use the hose to completely rinse it. I avoid spraying the hose inside the power transformer, but otherwise I spray everything. The key is to allow a long time for the water to dry. I leave the chassis out in the sun if possible for a couple of days. If not, I use a heat gun to dry it off.
I've never had a problem with flybacks, IF cans, or anything else as long as I don't get impatient and apply power before the set is completely dry.
|