|
I've only worked on 12" portholes but those have the CRT mounted to the chassis. I think the 16" sets are the same. There should just be 4 chassis bolts to remove and it will slide out (after removing all of the knobs of course). There may also be a ground wire going from the chassis to a screw on the escutcheon that will also need to be disconnected. Also watch out for the picture switch in the front controls. I think the '51 sets have it attached to the chassis but I found out the hard way on my '50 porthole that it was attached to the escutcheon.
__________________
Sean - WØKPX
|