![]() |
|
#1
|
||||
|
||||
|
Minerva wood table radio
I have collected a few old radios and recently came upon one I didn't recognize...at..all.
It is a Minerva, and I cannot find a model number. I did take the glass out and clean it with soapy water and dried it gently, I managed not to rub the lettering off the back of the face. I replaced the bulb and such. I went to deoxit the pots and when I went to turn the on/volume pot, I heard a snap noise, and I am thinking...wtf I check it out and the back of the pot is broke off and there is no way to glue it back on. Anyway, I cleaned the rest of the pots and put in some tubes I know are good. I also put a new string for tuning in it(pain) I temperarily crossed the power section that broke off to test it, and put on a new power cable. I plug it in, and I hear sound, I am so happy, then the dreaded hummm buzz kicks in, the filter cap is hot as sin. I have to recap it, , but the speaker and tuner works. I guess the questions are: Does anyone know anything about this radio? Does anyone know where I can get a switch/volume pot that will have the same resistances of the stock pot? Here are some pics of her, she is lovely however. I will need to refinish as well.
__________________
|
|
|