Last of the lower-end record changers.

[dieseljeep]

I ran into three later model record changers, where the turn tables wouldn't rotate.
What kind of grease did they use. I could see the BSR's seize up because they probably used fish oil grease, but GE's.
I tried using liquid wrench on the BSR's, but it softened the plastic turntable and almost ruined it. Finally, I used my torch and heated the center post. The same thing with the GE. The GE, you have to remove the retaining nut, that holds the spindle and turntable bearing.
Patience is a virtue in this case.