Magnavox CT 220 Anode Voltage.

[Xdevo1973]

Hi Everyone,

I finally decided to tackle this TV that sat in my basement for 10 years. It’s part of my Windsor Imperial top of the line console from 1948. I’ve restored a lot of radios and consoles but never a TV. I have it working pretty well. I’ve measured the anode voltage at 8kv. It drops in half with the brightness turned all the way up. Is this the right voltage? I’ve replaced the damper and the HV rectifier. I’ve replaced about 30% of the wax capacitors but not all of them, since I’m waiting for an order to arrive. I’m also waiting for a replacement horizontal output tube to show up. The CRT is a 12KP4.