RA-103D, some pointers on where to look after recap

[CJVx]

Hi, recently recapped this Dumont RA-103D, gorgeous Rumson model. Recapping was uneventful, replaced all values of electrolytics, cans and paper caps with like for like values.

The seller actually plugged this thing in and sent me a video of when he did on his listing. I’ll attach a screenshot. The image showed a hort vertical with full horizontal across the screen, not sure if there was any snow.

I brought it home, turned it on since it didn’t blow up for the seller to confirm it was still in the same condition. I had a similar image with short vertical, full horizontal but this time I had vertical bars in the center of the image. No photo of this.

Now after the recap, I have more vertical and can stretch it with the controls I’d need be, but I do hear audible noise corresponding with the vertical controls, sort of louder than I’ve heard on other sets. The vertical bars are still there, screenshot is anttached. Also I do not believe there is any rf or video. The brightness and focus controls do their thing, but no change to the image with the contrast control. Adjusting the

Any thoughts on this are appreciated! Thanks.

PS, I did test all of the tubes and found all of the 6SN7’s were weak, so those were replaced. The only tube I was not able to test or sub with a known good was the 5V4 horiz. damper. When the rf tubes and video tubes are removed, I get the same image on the screen as described after the recap.

Will be seeing with the audio situation is later today when I attach the speaker. Have not done that yet.