![]() |
|
#13
|
||||
|
||||
|
Google is your friend:
Manual: https%3A%2F%2Fdiagramas.diagramasde.com%2Fotros2%2 FKV-34DRC510.pdf (first hit with a google search for the Service Manual part number, 9-965-937-02) That's for the DA-4, multiple models. Most Sony CRT sets have the same data acronyms: VFRE Vertical Frequency VPOS Vertical Picture Position VSIZ Vertical Picture Size VLIN Vertical Picture Linearity VSCO Vertical Correction VCOM Vertical Compensation VUSN Shrinks Vertical Height to 16x9 Area VZOM Places Bars on Picture to give 16x9 Area EHT Adjust Height of VZOM ASP Vertical Picture Size - Aspect SCRL Vertical Picture Position Can't stress this enough - write down ALL initial values before making any adjustment. Note the range of values too - and don't go above or below. If you do, you may briick the set, as Sony used the DAS device to recover/restore EEPROM data. Without it, you're gonna be SOL if you corrupt the EEPROM Also, on the HD CRT sets, try the customer menu setting for aspect first - don't try to feed a 4:3 with a 16:9 aspect selected (or any other movie aspect ratio!)
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
| Thread Tools | |
| Display Modes | |
|
|