KV9200 Issues

[vol.2]

Originally Posted by zeno

C524 is probably stacked on the B+ instead of going to GND like
most sets so 50 V rating used. Fisher & GE also did this. Most
others used a 4.7 or 10mfd 315 V to GND.
Zeno

Yes, it's stacked on the B+. There's a .01uf film or ceramic (I'm not inside right now) going to ground between B+ and 162V Source. I guess I could try replacing that instead, or increasing it a bit if it looks okay. I've seen some film caps go bad I guess, but it's very rare.