|
Originally, the 6X5 does go to the same 6.3v winding and to ground as all the other tubes. But this new transformer has two 5v and three 6.3v filament windings, so I could change that. Two are 5v 3A, two are 6.3v 7A, one 6.3v 2.7A with an extra tap in the middle for 5v. Originally the sams says it requires 9.1A on the 6.3v filament winding. I suppose I could take the 6X5 and hook it to the 2.7A winding, and keep all the others on a 7A one, but then the 6X5 might be getting too much power, and the other tubes not enough?
|
09-30-2007, 06:22 PM
Threaded Mode