24 inch Muntz restoration has begun

[ohohyodafarted]

I finally got around to re-stuffing the cans last night. And today In installed the 24 inch monster crt. Fired it up and it works (sort of). Picture is less than desireable because the crt is weak. (I am working on a lead for getting another crt)

But the more difficult thisn is that I have problems with Horiz and Vert stability. The controls are very touchy and nearly impossible to lock the picture. When you can get a lock it dosent hold, and the slightest touch of the H & V controls will start the picture rolling.


Bad part is to work under the chassis, I am going to have to remove the 24 inch crt because there is no way to work on the chassis with the crt installed. The thing is just too big. I will sub my 5" test crt for bench work.

Is there a common area that would effect both H & V locking ability. Picture is just too unstable to be of any use. Tested and swaped a lot of tubes but that has not helped.

I figured one of the experts here might be able to steer me in the right direction.