|
Floating Freq.
I have a Zenith 10s153 that has two slight issues. The first is freq. shift.One day 1220 am. is at that spot on the dial and the next it will be at about 1270 on the dial. There are a few stations I listen to that are at 1150 and higher that all do the same thing. But a week later it will be where it should. I replaced all paper caps and filters, calibrated it up per diagram.So, why do the stations float? This only happens at start up. If I run the radio for hours the stations will stay where they were on start up.Also the 600kc. trimmer is bad When I order a new one what pf. range should I get? Thanks, Doug
|
05-25-2009, 11:28 AM
Threaded Mode