Quote:
Originally Posted by DaveWM
half meg? geez there must have been a super critical adj. check check the tube resisitance on pin 9 of the 6dr7 vert out tube to ground. Should be around 450 ohms, give the meter a chance to settle in as there is a bypass cap across it. It must be set to nearly fully closed (min resistance).
|
It settled in to a steady 940 ohms. And when you say "It must be set to nearly fully closed" You are talking about the Vert Lin pot? If so, it made no difference to the reading, no matter where I set the pot.
05-05-2010, 02:54 PM
Threaded Mode