|
|
|
#23
07-30-2010, 03:08 PM
|
|||
|
|||
|
FIXED, AND i AM AN IDIOT
after consulting with some folks over at fun with tubes, I check the line voltage AT THE CHASSIS, turns out it was low, I still had the set on the variac and thought I had 117v at the chassis, wrong, voltage drop across the line/switch must have been doing me in. The orig problem of under scan was prob fixed when I replaced the osc driver tube, as this improved the scan width, but by then I had the set on the variac. 
|
|
|
Threaded Mode