Director 21 resto begins....

[old_tv_nut]

Originally Posted by miniman82

No, it has a band with round magnets on it. I need to do the same thing you did on your 5, but I don't have a spare set of hardware to modify. My main issue is what to do with the yoke; it doesn't mount to the CRT neck, it's held by the large metal piece which also supports the CRT. Perhaps there's a way to use a later yoke with the pull up ring?

Looks like you have the edge magnets screwed out towards minimum strength - I'd guess that's the best position. If the ones on the bottom aren't screwed out all the way, you might try that. Also, if you have a small refrigerator magnet, you could try moving it around the bell about halfway back to see what effect you get.

I'd try getting the purity with added magnets before changing the hardware. I had no choice on the -5 when I went to the glass tube.