|
for comparison, 25kv 200ma brighness turned down all the way. Horz bias set too near min. FYI, could not get the KV lower than 25kv with min brightness.
Normal viewing has it bouncing around 220-240, kv jumps around a little in scene changes, but not too bad. No blooming or other issues.
I still have a soft focus. coil is turned all the way in, but that maybe due to some early work I was doing to it when I played with different focus coils, I plan to reinstall the old one. Right now in never goes thru a focus point just gets close until it bottoms out. All the way out is not better.
Last edited by DaveWM; 03-26-2011 at 09:04 AM.
|
03-26-2011, 08:58 AM
Threaded Mode