Before Convergence Adjustments

[Phil Nelson]

Also be prepared to degauss the set again if you move it to another place after doing the final setup & convergence.

This article describes some of my adventures in learning how to converge my first CTC-11:

http://antiqueradio.org/RCACTC-11Television.htm

If you're lucky, you will not need to do so many repairs along the way.

The Pict-O-Guide is well written and very informative, but I followed the Sams convergence instructions and (eventually!) got good results. There's no shame in repeating a procedure; it may take a while to get the hang of what various adjusters actually do. And, as already mentioned, you may need to accept some little compromises in the end.

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html