Crosley 9-403m Help Needed

[cdmarion]

I've got a crosley 9-403M that I restored 2 years ago, unfortunately a mouse decided to take up residence in the chassis and did some minor damage. I've got the wires and any components that were chewed on replaced. My problem is this, I turn on the set and get no raster at all EXCEPT when the brightness is turned all the way bright and I turn it counterclockwise fast then a raster with retrace lines will appear for a second and then it goes dark. It will not flash if I turn the control clockwise or if I turn it ccw very slow. I will also see a flash when I turn the set off. I've checked all tube voltages in the vertical and horizontal circuit and all seems to be ok except pin 4 of the vert. osc-discharge tube V-14, Sams calls for -2--5vdc and I'm getting a -41vdc. Any Ideas where I need to start looking? Any help is greatly appreciated.