![]() |
|
#11
|
||||
|
||||
|
I encountered another difference this evening - R177 is 2700 in my set but 1800 on the Rider's schematic. However, the RCA service info that came with the set shows 2700. I also notice at the bottom of the page Rider's has W93530-20 while the RCA just has W93530. Both do show 150K for R150 though.
![]() I've have been making progress in spite of the schematic confusion and have this section just about done. I'm surprised at all the cap brands - Aerovox, Cornel Dubilier (C-D), Sprague, Micamold, etc. No way that electrolytic in the middle could be reformed since it's blown a gasket. ![]() I assumed the cardboard cover was held on by a blob of tar and tried heating it. No luck so eventually I just torn it off and discovered some sort of varnish was used. Oh well. I'll cut it open, restuff and fabricated a new tube from something.
Last edited by bandersen; 07-11-2013 at 10:13 PM. |
|
|