![]() |
|
#1
|
||||
|
||||
|
Okay, hopefully last issue (convergence)
I spend quite a bit of time on the convergence yesterday and was able to get a decent convergence on most of the screen. I know perfect convergence isn't possible, but the areas I couldn't get converged are more off than I like. More off than any properly set up set I've seen. If you look at the attached image, the right side of the screen I can pretty much get the red and green aligned, but the blue has a mind of it's own. It doesn't even follow the same bend the other guns do. Also, the very top of the grid is quite distorted for some reason, but I was able to get pretty close. On the left side, the blue is doing the same as the right, but not as bad.
The sides being off is quite noticeable in most viewing material and is distracting. I'm used to seeing a little red or blue poking out here and there, but these are magenta, yellow and blue over a good portion of the sides. Thanks.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
|
|