Quote:
Originally Posted by DaveWM
you need to check the other voltage at the pins of the CRT the cathodes/G1 and G2.
It does not follow that you can not get the setup to work with the switch. If the crt test good it should work, if it does not work there is a problem.
|
Okay, here's where I get lost. Finding the G2 lines was easy. I just connected to them at the pots. As for the G1 lines, I don't know which ones they are. The G2s are all white with red, blue and green stripes. Then I have yellow wires with red, green and blue stripes and solid color red, green and blue wires. That makes three sets of wires and no indication in the SM as to which sets are which. I do know the black is focus, though.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
08-23-2013, 11:07 AM
Threaded Mode