Replace screen taps w/pot Zenith

[TinCanAlley]

Bump....

Found the connectors, but having a hell of a time figuring out what pots to get. Voltage seems independent of wattage in many descriptions. All I know from the SM is that the voltage is 200 and the wattage used for the resistors is 1/2w. Pots I've been looking at range from 1/5w up to 5w and the voltages range from 200V to 500V. I figured a 200V would be good, but then I saw the wattage was only 1/5w. These two things can't be independent, right?

Also, does anyone know of a good source for the pot I'll need? I've looked at mouser and they are between $50 and $120 each. Not only that, but many of the wirewound I've looked for are multi-turn. Don't think I really need 10 turns for adjustment.

So if anyone knows where I can get 5K pots that can handle the 200V from the screen taps that won't exceed the value of the set or burn up shortly after first use, please let me know. Want to get this right the first time.

Thanks