Restoring a 1963 Admiral ctc-12 clone

[kramden66]

I've replaced a couple film caps even though they are not leaky and might replace a couple others to see if there is a change , sad thing is it just happened , wasn't like this when I first got it running , I replaced all the electrolytics , also got a good 12BY7 , my previous had very low emissions so I'm hoping it too wlll correct things or maybe was the culpret.

I still wonder should I check all those resistor looking capacitors on the if board or at least the ones near the 6AW8 ? if yes and one is bad a mica cap will work there as long as it is the same picofarads value ?

I really want to put the thing back together and watch it

mike