|
|
|
#4
09-05-2014, 02:03 PM
|
||||
|
||||
|
The RF input on the XK series of Profeel monitors is a IDC-34 connector, like on a floppy drive. The KV-1311CR had the same connector.
The RGB signal can be either digital or analog, the digital is TTL digital and conforms with the CGA standard. Analog RGB must have a standard NTSC scan rate, there where adapters for the Atari ST and Apple IIgs to allow the RGB input to be used with those computers. 
|
|
|
Threaded Mode