|
|
|
#11
01-08-2015, 05:27 PM
|
||||
|
||||
|
I mounted the new terminal, reconnected everything, and it's still doing the same thing.. BTW the hum turns up/down with the volume control, all the way down you don't hear it.. I don't know what else to think of.. Either there is a problem with the first can, or I could have accidentally disconnected something else by moving the chassis around.. Or blew something up even though I didn't ever hear anything or smell anything.. I don't know where to go from here, other than give the set to Dave to look over.. I even checked for possible wires for continuity, ground continuity from terminal etc.. And everything looks fine.. I can't check the big green power resistors on the power board seeing how Sams only lists specs for only a few of them, and don't know the values..
Here's a pic of the crystal that glows when HV comes up.. 
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet.. Last edited by tvcollector; 01-08-2015 at 06:54 PM. 
|
|
|
Threaded Mode