ctc12 clone beam current

[DaveWM]

Originally Posted by timmy

ok pulled the chassis out alittle to see under it . yes the red yoke i know goes to the centering pot, center leg. the blue yoke wire goes under the chassis to a tie strip which has one of the 1.5 meg resistors its tied to that and also 2 red wires red also tied to that terminal one comes up to the fly terminal #2 which goes to f coil # 1 and the other red runs up to attach to a cap and the one of the coils on the damper. this is confirmed.

blue should go to focus coil(w/100k mounted to focus coil),1.5 meg (part of shunt reg circuit),10k(part of boost supply circuit),.12 cap,bottom winding of fly.

BOTTOM WINDING OF FLY NEEDS TO BE CONFIRMED