|
ok so all caps are changed and also the lytics except the 5- 6kv caps as i clipped one by one to see if this was the problem and it still is not right. and now i changed the seleniums to silicon diodes and a dropping resistor in place but i still have the same thing where once the tubes light and things start to conduct the voltages are jumping up and down and i have no clue why. it seems as if something is preventing the voltage from advancing. unless i need to put the 5- 6kv caps in and this is the problem but still waiting for just radios .
Last edited by timmy; 03-06-2015 at 11:52 AM.
|
03-06-2015, 10:41 AM
Threaded Mode