Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 04-03-2015, 07:03 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
OK watched the video, that was exiting ! And informative....

A good working TV will give what we called good snow & a
nice loud waterfall sound without signal. Yours does not.
Snow should be dots without streaks & lots of contrast.
Changing channels on yours does not show any switch noise
that I can see. Everything points to IF problem.
Try freeze mist. After warm up spray some on a Q-tip then
hold it to the IF transistors one at a time. If no joy with 1st IF
let it warm up again then try 2nd etc. It may be just as easy
to change all 3 ONE AT A TIME ! I used ECG replacement with good luck
except when I worked at Sony Service, then it was OEM
needless to say.
One other thing about all early Jap sets is they were ALL very
unstable after a few years. They used crap electrolytics.
Aim to get the IF's "hot" again & deal with any instability
later.

73 Zeno
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.