|
|
|
#1
04-24-2015, 10:52 PM
|
|||
|
|||
|
Philco Tandem
Hi All:
I am working on a Philco Predicta Tandem and have restored the boards with the standard new resistors and capacitors. I have it all back together and have given it a try and it is somewhat working, the vertical locks in solid but right in the middle of the screen so I see the top of the picture below the middle of the screen and the bottom of the picture above the middle of the screen. Also the HV is a little low, should be about 15KV and I measure 12kv. Any thoughts on what's going on here? Thanks Gregb 
|
|
|
Threaded Mode