Quote:
Originally Posted by rca2000
You did it BACKWARDS. Put the black probe lea don the hot ground. Use ther red or positive one---for all of the other readings.
BUT...i did NOT see any 171 volts on ANY pins of that chip. Are you SURE_-you got all of the pins? 2 of them are scattered from the otherrs--remember. if you did NOT...then check those 2 large resistoirs beside of that chip...and see if they are OPEN. They likely read LESS than one ohm. If OPEN--that ahip IS shorted.
|
Ok, i figured as much. I'll hit it again tonight or no later than tomorrow. I'll need to get this part, whatever it ends up being, ordered so i can get it in soon.
08-13-2015, 02:08 PM
Threaded Mode