|
|
|
#10
08-29-2015, 11:42 AM
|
||||
|
||||
|
Will go through and resolder all the sockets. And I forgot to mention Dave I did indeed forget to plug in the convergence board my bad. Only problem is my horizontal hold knob is stuck on the shaft. Will heat it up then pull the chassis out for hopefully the last time. Note I did lose color after cleaning the tuner. Could I have messed up something in the tuner causing no color? All I did was go over the copper coils and other moving parts with a q-tip dipped in deoxit.
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) 
|
| Audiokarma |
|
|
Threaded Mode