1961 Coronado Capri

[dieseljeep]

Originally Posted by zeno

It may be an error in Sams. If its a say 33 ohm & you add
a zero its a 330 ohm..........

For now just check for APX 95 vac on pin 7 of tube V7.
You do not want to put a 33 ohm in if its a 330 ohm.
NOT good for the filaments............

Why get a pix first ?
1) to be sure you got a good CRT. Even if it tests good it still can be bad
& visa versa.
2) check to see that all MAJOR parts are OK. Even 40 yrs ago
you couldnt get some of this stuff.
3) you learn by troubleshooting NOT shot-gunning
4)re-caps need to be done a few at a time followed by a test.
If you do something wrong its easier to find if you just gotta
look at a few things. Nothing worse than finding a self induced
problem. Sends techs running if its "been somewhere else"
& never fixed. And you never get the truth out of the
customer !!

good luck
Zeno

33 or 36ohms has to be right! 36 ohmsX 600ma=21.6 drop. 21.6+95=117volts, approx.