|
before you ordered the inverter...
DId you CHECK and see if it was getting its "must haves" from the signal board? The turn on command and the PWM signal for dimming ? you DID check and saw that the 24 volts was there I know...and did you see ANYTHING on the screen--if you shined a bright flashlight into the center of it--when the set is turned on?
You PROBABLY have a bad inverter--but You DO need to check these things first...because if the signal baord is not providing it with what it needs--it will NOT come on...even a new one will not .
|
12-07-2015, 10:17 PM
Threaded Mode