1940s Emerson

[Farlander]

Originally Posted by N2IXK

Yes, you want the neutral side of the line to connect to the chassis.

Unfortunately, the set has the power switch in the grounded side of the line, which will make the chassis hot with respect to earth ground when the set is turned off.

To make such a set as safe as possible without major redesign, I would recommend the following:

Replace the interlock and cord with a polarized type.

Move the power switch to the hot side of the line.

Directly ground the neutral side of the line to the chassis.

Delete C85.

Replace C84 with a safety rated (X1Y2) ceramic cap.

Should that capacitor have the same capacitance as the original or just anyy capacitance.