Columbia 817-6

[Doug66]

Pin 4 of horiz output tube is way off. It SB 150v then goes thru a 6.8K, then a 4.7K to a 330v source. I have 295V at pin 4 all the way thru the resistors and at the source.

I replaced the 6.8K resistor. The 4.7K checks about 5.3K and I have to get one of those.

The 1st paper cap I replaced was the .05 coming off pin 4 to ground. I have also replaced the .05 coming off pin 2 of the flyback.