LowB+ in a CBS Ch 817-6

[Doug66]

Hey Guys,
Sorry to be so long on getting back with me response.
Kevin, I just checked the replacement yoke I put in against the original yoke (which was good) and it is hooked up right.

I'm somewhat confused on what you mean be checking across the woke windings. I unplugged the vert and horiz output tubes. On each yoke lead I got about 340V. Putting the meter leads directly across the yoke leads reads nothing.

I finally got a pic of the screen with a signal applied. Compressed on left and wavy, and vert lacks height. Brightness is at max. Also can't get a good lock on vertical. Assume this is all due to the B+ being too low.