|
|
|
#11
02-02-2017, 11:26 PM
|
|||
|
|||
|
BTW, I'm making a list of all the resistors and capacitors used in this set.
I'll do my usual practice of going up in wattage on the resistors. I'll use the yellow tubular film caps from Sal or Just radios all rated at 630V. All micas will be at least 5% 500V rated. The E-Caps will be 450V or 500V except for the few odd values and much lower voltages. Those will still get at least 250V simply because the leads are thicker and less prone to breakage. I know there is a door knob cap rated at 500pf but no voltage is given. I'm guessing at least 10K? Are there any other caps that are rated at a higher voltage? I see C141 a 56pf cap in the yoke. Would this be like a 1KV or higher? 
|
|
|
Threaded Mode