Quote:
Originally Posted by Crist Rigott
I used gloss clear and then the semi-gloss for the final 5 coats.
I'll start sanding with some 1200 that I have and move on with 1500 and finally with 2000. then rub ]
|
Be careful not to sand or rub through to the gloss or you'll have shiny spots. Also semigoss is made by adding a fine particulate to gloss. If its uneven in thickness, you can get an uneven sheen. Another option is to only use gloss and control the sheen by rubbing it out with a courser grit
09-10-2017, 10:29 AM
Threaded Mode