Another craigslist project.. A sears console with no raster.

[zeno]

Before you go further make 2 DC measurements.
1) measure the collector of one of the 3 video outputs on
the CRT socket.
2) the G-2 ( screen ) voltage at the CRT socket.

This narrows things down.
The colored blobs are normally seen at turn off & is usually normal.
BTW try the G-2 control on the FBT. Just turn it up a tad.

73 Zeno
LFOD !

Originally Posted by Sealtest

Resoldering did nothing, so I will have to pull the board.

When the set is powered on, there is an extremely bright blue and green dot on the screen. What is this?