I removed the Flyback, Yoke wiring, CRT wiring, and 2 terminal strips off the top side of the chassis so I could clean it better.
I did move the pencil box controls 1 hole over to the right and the "Tone" and "TV/Phono" switch was pushed behind the front panel. I just might make a bracket to mount it to and drill a hole in the bottom of the cabinet to access these controls. We'll see. That will happen a lot further down the road.
In the meantime I'm using a wire wheel/drill and Naval Jelly to get rid of all the rust spots.
01-09-2019, 04:34 PM
Threaded Mode