Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
Go to Page...
We appreciate your help
in keeping this site going.
Well, I had replaced all of the caps in the sweep circuits. Later today I'll try injecting a composite signal and seeing where that gets me.
~Zach
It may be possible that the alignment is out just a little, if you check the schematic you can very slightly move the channel 3 adjustment on top of the chassis, but do make sure you have a good signal to start with.
02-19-2019, 03:43 PM
Threaded Mode