|
|
|
#11
07-03-2019, 10:52 PM
|
||||
|
||||
|
Possible. I just had a 21AXP22 I wrote off for dead when I bought the set it was in come back to life...CRT heater was open, but reflowing the solder on the base pins (after I verified the tube was still under vacuum) brought it back.
Sockets can fail too. The focus contact is usually first to go beacuse the ozone the HV generates corrodes the metal faster, but no harm checking them all though.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
|
|
Threaded Mode