Schematic for amp in Columbia CCD-2 record player?

[maxhifi]

Webcor have bad rubber grommets in the arm which you have to replace, and then a hard to find idler wheel. I also don't like how they have a gear which always turns with the platter and never disengages. They seem quite prone to rumble issues.

Originally Posted by Electronic M

I have so little time these days that it is hard to get me to touch somebody's project even if you wave money in my face...may have better luck getting me to fix somethings by giving it to me and hoping I spruce it and flip it and yer there when I try to sell it... at least one customer unknowingly accomplished this by giving me some console radios...

This being the perpetual issue... In the time it takes to make that thing work, there's many other more profitable things I could do.

That's a VM changer, they aren't junk, but any changer being done for someone else is by definition a pain in the neck, and if I have to spend a few hours messing with the trip mech to make it work right, and then suddenly the arm starts going to the 45 position when I have LP selected, I'd regret taking on the whole project.

I actually end up regretting it every time I take on a changer for someone - it seems invariably when people find out I'm interested in vintage electronics, someone wants me to fix a crappy old console or portable player with a dilapidated old changer at its heart.

The only ones I will happily touch for someone else these days are 70s BSR changers, with the slim line cartridge. I can usually make one run reliably with less than an hour's work, and the mechanisms are almost bulletproof. They are also reasonably easy on records, usually have good idlers still, and the styli are cheap. I'd rather do 3 BSRs than a single Dual or Collaro