Another Westinghouse H840CK15

[trinescope]

I can get 3M type 56 tape from Mouser, so I'll go with that on my next attempt. I attempted to wind the secondary without insulating tape between the layers because I was running low on tape at the time. The problem is the wire at the edges of the layers start moving out of place during winding of subsequent layers because there is nothing holding them in place. At least using tape between layers does hold the wires in place. There are 69 layers in the secondary, so keeping them in place without tape layers will be hard. Also I need to come up with a way to keep distance from the free wire ends of the windings and the winding layers themselves to avoid breakdown there.