Quote:
Originally Posted by joe111671
Thanks Zeno. The big can on this set only has one section. I looked around for either a 4.7 or 10 mfd @350v on the board but things are pretty tight in there and I can't see the values of many of the caps so not sure which one it is.
|
Some had the dual section, some didn't.
IIRC, the cap in question is about the 10 o'clock position at the flyback looking from the back, but it's been many years since I did one.
In any case, you can bypass the line right at the CRT socket. Add a 10uf/350 right on kine source line to ground.
John
02-12-2020, 08:16 PM
Threaded Mode