My TV Chassis has developed a magnetic personality!

[Jon1967us]

Originally Posted by Eric H

The Ion Trap is supposed to be adjusted after the set is together.

Originally there was a piece of stiff paper (possibly Fishpaper) attached to the Ion Trap and long enough to reach through the hole in the back of the cabinet. Many of them have long since rotted off and disappeared.

I encountered this problem on the very first one I did, drove me crazy until I figured it out.

Yes.

After a bit of back and forth, I came to this conclusion as well. That, the trap needs to be adjusted AFTER the set is reassembled. The trap is simply designed to work in this configuration. In this case it's a royal pain because of the surrounding neck shield and how difficult it is to maneuver, working in such a narrow tube. I have to see if I can figure out the best tool to use. So far a needle nose pliers or long flat blade screwdriver have been the best choices but very difficult to use. You can push the magnet in but moving it back out or side to side is nearly impossible.

Also wondering if I should replace the original thick fish paper with new stuff that is thinner and allows for easier adjusting of the ion trap...