Quote:
Originally Posted by Kevin Kuehn
R11 and C2 form the AVC filtering. Take a look at the schematic and you will see that each end of R11 goes to a separate IF can.
|
Actually I think the schematic is wrong, because in the radio itself both IF cans go to only ONE SIDE of R11, and I didn't touch that wiring except to replace the old dry rotted wire from the 1st IF can and I just wired that wire back to where it was previously, and I didn't touch the wiring to the 2nd IF Transformer because the wiring was fine in it.
07-02-2020, 01:20 PM
Threaded Mode