Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-27-2020, 01:33 PM
damen's Avatar
damen damen is offline
VideoKarma Member
 
Join Date: Feb 2008
Location: Portland, OR
Posts: 668
1951 Zenith Won at Mclarin Auction Oregon

Hey Guys... I won this 51 Zenith for $160 and a 1950 RCA that used the same CRT I won for $40. The tube was broken on front in the Zenith as seen in the pictures so I am using the tube from the RCA in it. The tube checks good from the RCA but not great, should make a decent picture I hope. I have recapped the set and when powered up found it had no high voltage. I could see the width coil looked burnt so I detached one of the wires coming from the fly to it since this is Variable inductance shunted across the secondary of the Flyback. I got High voltage after that. However the image is very narrow horizontally and more narrow at the bottom then the top. I am trying to find a width coil with no luck. I even made something up with old coils that seemed close and got the same results.
Any one worked on these know if without the width coil in the circuit would it normally fill out the screen? I jumped across it and it does not. Seems like it would, All the voltages are there going to the horizontal section.

Thanks I appreciate any help on this!
Attached Images
File Type: jpg 8 2020 at Auction (3).jpg (63.9 KB, 60 views)
File Type: jpg DSC01604.jpg (68.1 KB, 59 views)
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:36 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.