Quote:
Originally Posted by Electronic M
You want to use ammonia to clean the mating surfaces. The factory glue responds best to ammonia and if you don't clean the factory glue off it will continue to degrade and undermine anything glued to it.
|
OK, my parents have some ammonia in their basement, I might have to borrow some.
But no one answered my question about the electrolytic caps in the big Zenith TV, I had asked if it was ok to just replace the bad sections of the multi-section caps and continue to use the good sections of the multisection caps, or if I should just replace all of the electrolytics and be done with it?
10-27-2021, 03:31 PM
Threaded Mode