Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 01-13-2022, 03:02 AM
HelloVoltage HelloVoltage is offline
VideoKarma Member
 
Join Date: Nov 2018
Posts: 33
Quote:
Originally Posted by etype2 View Post
Does it use one or two photo cells?
This , specifically from a disassembled xav-u50, has 2 photocells, masked as D901,D902 on Assembley board "N".
The other relavent masking on the board reads :
1-642-164-11




The reverse of that board other components with a soldered shield, which I have not removed. So no other information can be provided about now.

This xav-u50 definitely has caps swapped out, and they are in most of the places I have visually identified leakage on the xav-55n. I will provide photos as possible, and list the masking id's of the obviously replaced caps.

So far , the only difference between the 2 is the replaced caps, an extra power harness for the xav-55n, to facilitate use without diversity unit (I assume). There is also a small board on the bottom side of assembly board "B" on the XAV-U50, which I suspect was a service update. It is secured only with double sided tape, and manually soldered in.


Last edited by HelloVoltage; 01-13-2022 at 03:09 AM.
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:06 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.