|
|
|
#24
06-04-2022, 02:10 PM
|
||||
|
||||
|
May have missed it but have you tried pulling the key inputs
& using the remote. If its an SMD no easy way. Any TAC switch is suspect for leakage. On older sets we would unhook most of the micro & just keep the ON/OFF path. Then hook things up til it stops working. Almost always a TAC switch or little disc. Also check & be sure you are getting a good RST, you can also force it to test ( RST or NOT RST ). Lytic cxaps & RST transistors the usual perps here. BTW you are covering things well but did you pull the batteries from the remote ? 73 Zeno  LFOD ! 
|
|
|
Threaded Mode